Tel: 0808 123 1214 Tel: 07780808282
Brick Cleaning
The ultimate clear waterproof paint & protective masonry cream. A surface treated with masonry cream will insulate mineral building materials by reducing water absorption. The masonry cream chemically bonds to the surface, penetrating up to 17mm to create an
invisible insulation barrier.
Properla Masonry Crème
Key Features:
Key features of our masonry cream include:
•
For use on a range of substrates including brick, stone, concrete and sandstone
•
Manufactured in Germany using the very latest, superior technology
•
It has undergone UKAS Accredited testing
•
Verified by the Energy Saving Trust
•
One-coat masonry protection cream
•
Penetrates up to 17mm into the substrate to provide a clear insulation barrier
•
Chemically bonds to mineral surfaces
•
Dries clear, it does not alter the appearance of the substrate
•
Super hydrophobic coating
•
Creates a self-cleaning surface like the Lotus Effect
•
Highly breathable
•
Helps prevent salt efflorescence and sulphate attack
•
Helps prevent discoloration
•
Discourages growth of moss, algae and lichens
•
Prevents frost damage
•
Proven performance
Insulation Barrier
The masonry cream creates a clear insulation barrier for single skin buildings and those built with a cavity. It has been proven to help retain heat in walls and reduce heat loss.
UKAS accredited tests have demonstrated that by reducing water absorption of the walls, our masonry cream lead to thermal performance benefits. It has been proven to meet EAD 040083-00-0404. In addition, testing in a hygrothermal chamber revealed that a
wall coated in the masonry cream and subjected to repeated heat-rain conditions in accordance with EAD 090062-00-0404, resulted in reduced heat loss when compared with the uncoated (control) wall. The uncoated wall showed on average an increase of 6⁰C of
heat loss in comparison to the walls coated with ProPERLA Masonry Crème.The clear coating improves thermal efficiency and contributes to lower energy consumption and lower energy bills, by keeping walls dry. Damp walls act as ‘thermal bridges’ – enabling
heat to transfer from the inside out twice as quickly as it would if the walls remained dry.Independent testing has shown that ProPERLA Masonry Crème reduces water absorption by 96.3% and meets the British standard for water vapour resistance BS EN ISO
7783:2011.
Breathable
ProPERLA Masonry Crème does not restrict the ability of the building to breathe. Water vapour permeability testing was conducted in accordance with BS EN ISO 7783:2011 and it demonstrated that the
coating had little effect on the water vapour diffusion of the substrate.
Application of our masonry cream protects the walls and cavities by keeping them dry whilst allowing air and moisture to escape. It maintains the important capability of the building envelope to breathe. Unlike
some stone and brick sealer products, it does not block the pores of the masonry by coating them with a thin film. Therefore, the product is a breathable masonry paint which helps to prevent penetrating damp.
Super Hydrophobic Coating
A surface is considered super hydrophobic if a water droplet beads up (with a contact angle greater than 140⁰ and the droplets can slide aware from the surface readily (it has a small contact angle
hysteresis). Super hydrophobic surfaces repel water, causing it to form beads because it is more attracted to itself than the surface. This means water will run off the surface making it extremely difficult to
wet.
This is known as the ‘lotus effect’ due to its similarity to the lotus leaf but is also seen on duck feathers and butterfly wings.
Substrates coated with the protective masonry cream will respond in the same way – water will form droplets and won’t penetrate the substrate. Independent testing has shown that it reduces water
absorption by 96.3% and meets the British standard for water vapour resistance BS EN ISO 7783:2011.
Proven Performance
ProPERLA Masonry Crème has undergone independent tests by UKAS certified body Lucideon and has been
proven to meet the following standards;
•
EAD 040083-00-0404 – 25 year hygrothermal performance
•
EAD 090062-00-0404 – external thermal insulation composite
•
BS EN ISO 7783 – 2011 – water vapour diffusion
•
BS EN ISO 12572 – water vapour resistance
20 Year Product Guarantee
ProPERLA Masonry Crème benefits from a 20 year manufacturer’s guarantee but has been proven to
perform for 25 years. When tested under 25 years accelerated weathering conditions there was no
deterioration in performance or aesthetic appearance.
20 Year
Guarantee
Masonry Creme A Clear Insulation Barrier
Properla Masonry Crème creates a super hydrophobic surface
which helps to prevent salt efflorescence and sulphate attack is
highly breathable, prevents frost damage and has been proven to
help retain heat in walls and reduce heat loss.
Exterior Brick Stone Cleaning & Coating
Extreme Climate ONE COAT water seal stops penetrating damp using the latest fluorocarbon technology to create
simply the best performing (100% breathable) brick and stone sealer available today. With a lifespan of up to 10 years
and no surface darkening, this formula halts rainwater absorption offering truly exceptional hydrophobic or "bead up"
water repellency. Kingfisher Approved contractors can offer a 10 year re-pointing guarantee, incorporating Extreme
Climate, Kingfisher pointing mortar and pointing solution.
Extreme Climate water seal prevents damaging moisture ingress which causes masonry to spall in the freeze / thaw
cycle and inhibits moss growth by robbing it of water and nutrients drawn from damp mortar. Using "Extreme Climate" to
dry out a damp wall can also reduce thermal loss by up to 30% because a wet wall is a cold wall and "bleeds" heat to the
atmosphere at an accelerated rate.
Drying out the wall with Extreme Climate also reduces the problem of condensation and black mould, which develop on
the indoor side of exterior walls when rain saturation cools the wall temperature such that warm moist indoor air
condenses on the cold surface
Extreme Climate water seal also helps to keep buildings clean by forming an effective barrier against airborne dirt and
other contaminants, which would otherwise be dissolved by rainwater and leech into the substrate where they inevitably
stain the surface.
‣ Stop penetrating damp with our 100% breathable brick & stone sealer
‣ Lasts up to 10 years
‣ Reduce thermal loss by up to 30%
‣ Reduces condensation & black mould
Brick Cleaning
The ultimate clear waterproof paint & protective masonry cream.
A surface treated with masonry cream will insulate mineral
building materials by reducing water absorption. The masonry
cream chemically bonds to the surface, penetrating up to 17mm
to create an invisible insulation barrier.
Masonry Crème
Key Features:
Key features of our masonry cream include:
•
For use on a range of substrates including brick, stone,
concrete and sandstone
•
Manufactured in Germany using the very latest, superior
technology
•
It has undergone UKAS Accredited testing
•
Verified by the Energy Saving Trust
•
One-coat masonry protection cream
•
Penetrates up to 17mm into the substrate to provide a
clear insulation barrier
•
Chemically bonds to mineral surfaces
•
Dries clear, it does not alter the appearance of the
substrate
•
Super hydrophobic coating
•
Creates a self-cleaning surface like the Lotus Effect
•
Highly breathable
•
Helps prevent salt efflorescence and sulphate attack
•
Helps prevent discoloration
•
Discourages growth of moss, algae and lichens
•
Prevents frost damage
•
Proven performance
Brick Cleaning
Insulation Barrier
The masonry cream creates a clear insulation barrier for single
skin buildings and those built with a cavity. It has been proven
to help retain heat in walls and reduce heat loss.
UKAS accredited tests have demonstrated that by reducing
water absorption of the walls, our masonry cream lead to
thermal performance benefits. It has been proven to meet EAD
040083-00-0404. In addition, testing in a hygrothermal
chamber revealed that a wall coated in the masonry cream and
subjected to repeated heat-rain conditions in accordance with
EAD 090062-00-0404, resulted in reduced heat loss when
compared with the uncoated (control) wall. The uncoated wall
showed on average an increase of 6⁰C of heat loss in
comparison to the walls coated with ProPERLA Masonry
Crème.The clear coating improves thermal efficiency and
contributes to lower energy consumption and lower energy
bills, by keeping walls dry. Damp walls act as ‘thermal bridges’
– enabling heat to transfer from the inside out twice as quickly
as it would if the walls remained dry.Independent testing has
shown that ProPERLA Masonry Crème reduces water
absorption by 96.3% and meets the British standard for water
vapour resistance BS EN ISO 7783:2011.
Breathable
ProPERLA Masonry Crème does not restrict the ability of the
building to breathe. Water vapour permeability testing was
conducted in accordance with BS EN ISO 7783:2011 and it
demonstrated that the coating had little effect on the water
vapour diffusion of the substrate.
Application of our masonry cream protects the walls and
cavities by keeping them dry whilst allowing air and moisture to
escape. It maintains the important capability of the building
envelope to breathe. Unlike some stone and brick sealer
products, it does not block the pores of the masonry by coating
them with a thin film. Therefore, the product is a breathable
masonry paint which helps to prevent penetrating damp.
Super Hydrophobic Coating
A surface is considered super hydrophobic if a water droplet
beads up (with a contact angle greater than 140⁰ and the
droplets can slide aware from the surface readily (it has a small
contact angle hysteresis). Super hydrophobic surfaces repel
water, causing it to form beads because it is more attracted to
itself than the surface. This means water will run off the surface
making it extremely difficult to wet.
This is known as the ‘lotus effect’ due to its similarity to the lotus
leaf but is also seen on duck feathers and butterfly wings.
Substrates coated with the protective masonry cream will
respond in the same way – water will form droplets and won’t
penetrate the substrate. Independent testing has shown that it
reduces water absorption by 96.3% and meets the British
standard for water vapour resistance BS EN ISO 7783:2011.
Proven Performance
ProPERLA Masonry Crème has undergone independent tests
by UKAS certified body Lucideon and has been proven to meet
the following standards;
•
EAD 040083-00-0404 – 25 year hygrothermal
performance
•
EAD 090062-00-0404 – external thermal insulation
composite
•
BS EN ISO 7783 – 2011 – water vapour diffusion
•
BS EN ISO 12572 – water vapour resistance
20 Year Product Guarantee
ProPERLA Masonry Crème benefits from a 20 year
manufacturer’s guarantee but has been proven to perform for 25
years. When tested under 25 years accelerated weathering
conditions there was no deterioration in performance or
aesthetic appearance.
Exterior Brick Stone Cleaning & Coating
